The Technical Program is now available!. COVID-19. ASM International has been monitoring the development of COVID-19 and assessing its possible impacts on all of our organizations’ activities.
ASM International is the world's largest association of materials engineers and scientists. We are dedicated to informing, educating, and connecting the materials community to solve problems and stimulate innovation around the world.
Molten salt is an ideal medium for interrupted quenching processes. Nitrate-based salt, the most widely used, blankets the quench temperature range of 150
This article reviews the basic equipment and methods for creep and creep rupture testing. It begins with a discussion on the creep properties, including stress and temperature dependence, as well as of the extrapolation techniques that permit estimation of the long-term creep and rupture strengths of materials.
Defects and Distortion in Heat-Treated Parts Anil Kumar Sinha, Bohn Piston Division MOST OF THE PROBLEMS in heat- treated parts are attributed to faulty heat-
Who We Are. ASM International is the world's largest association of materials-centric engineers and scientists. We are dedicated to informing, educating, and connecting the materials community to solve problems and stimulate innovation around the world.
Introduction to Tensile Testing / 5 Fig. 6 The low-strain region of the stress-strain curve for a ductile material tic contribution and e e is the elastic contribution (and still related to the stress by Eq 3). It is tempting to deﬁne an elastic limit as the stress at which plastic deformation ﬁrst occurs
Request more information on ASM Database Licenses and Pricing. Contact Sales at [email protected] or 440.338.5151 for more information and to schedule your free trial access to the database. "The ASM Alloy Phase Diagram Database is an invaluable resource for me, both in my teaching and research.
The best single-volume reference on the metallurgy, selection, processing, performance, and evaluation of stainless steels, incorporating essential information culled from across the ASM Handbook series. Includes additional data and reference information carefully selected and adapted from other authoritative ASM sources.
Chapter 1 Introduction to Chemical Vapor Deposition (CVD) J. R. Creighton and P. Ho Sandia National Laboratories P.O. Box 5800, MS0601 Albuquerque, NM 87185-0601
Type Etchant Applications Ti base alloys Ti Base Alloys 22, 23 General structure Medical/high corrosion resistant alloys MP35N(2), Alloy 2 (AMS 5842)(3), MP35N LTi 30 General structure
Volume 24 provides information on the metals, ceramics, and polymers used in additive manufacturing (AM) and how they respond to the transformative forces and energies applied over the course of production.
High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance
fast, there is an increased propensity for distortion. Therefore, one of the pri-mary challenges in quench-process de-sign is to select quenching conditions
Abstract. Cobalt is used as an alloying element in alloys for various applications. This article provides a detailed account of the metallurgy of cobalt-base a
HEAT TREATING ALUMINUM FOR AEROSPACE APPLICATIONS It is of low weight. Its alloys can be heat treated to relatively high strengths. It is of reasonable cost, and it is easy to bend and machine.
Fatigue Testing Introduction Fatigue is the progressive, localized, perma nent structural change that occurs in materials subjected to fluctuating stresses and strains that
2 / Engineering Properties of Magnesium Alloys • Magnesium-zinc-zirconium (ZK), with rare earth (ZE) • In general the constituent elements have the folMagnesium–rare earth metal–zirconium (EZ) • Magnesium-silver–rare earth metal–zirco- nium (QE) • Magnesium–yttrium rare earth metal–zirco- nium (WE) • Magnesium-zinc-copper-manganese (ZC) ...
peaks are then examined in a region specific to phthalates (1620-1560 cm-1), and if the match is good, a report similar to the one shown in Fig. 2
Each unique thermal process dictates the selection and operation of thermocouples, and while many factors contribute to thermocouple life expectancy, which can
start temperatures and the retained proportions of austenite usually are known. Based on this data, fine-tuning of the parameters relationship to the Koistinen-Mar- burger Law (which describes the martensite transforma- tion by mathematical means) can be performed using the
Chapter 1: Introduction to Composite Materials / 3 Fig. 1.2 Influence of reinforcement type and quantity on composite performance Fig. 1.3 Major polymer matrix composite fabrication processes
ADVANCED MATERIALS & PROCESSES • MAY 2014 23 Development of Ti 2AlNb Alloys: Opportunities and Challenges D uring the past 30 years, enormous re-search has been devoted to developing
*The Speaker rate includes oral presenters, poster presenters, and Organizing Committee Members. Students: To qualify for the student rate you must be age 35 or under and have a valid copy of your student ID.
Pickling is the most common of several processes used to remove scale from steel surfaces. This article provides a discussion on pickling solutions, such as sulfuric and hydrochloric acid, and describes the role of inhibitors in acid pickling.
This book is dedicated to my parents, Mr. and Mrs. Upendra C. Rakhit; my wife, Ratna, for her understanding and inspiration; and my son, Amit, and daughter, Roma, for their love and support.
Fundamentals of Ultrasonic Inspection* Revised by Leonard J. Bond, Iowa State University ULTRASONIC INSPECTION is a family of nondestructive methods in which beams of
Alloy Digest. The leading reference for materials property data on metals and alloys used throughout the world, Alloy Digest data sheets provide facts and figures on composition and characterization, physical and mechanical properties, heat treatment, and machinability.Published by ASM International. Renowned for their coverage and quality since 1952, Alloy Digest also covers workability ...
Stress-Corrosion Cracking Materials Performance and Evaluation Second edition edited by RuSSell H. JoneS ASM International Materials Park, OH 44073-0002 www.asminternational.org
plications. It enables machine vision to be used for a variety of functions, including: identification of shapes, measurement of distances and ranges, gaging of sizes and dimensions, determining orientation of parts, quantifying motion, and detecting surface shading. Several examples of machine vision applications are shown in Fig. 3.
Principles of Failure Analysis, 3 Day, August 24-26, 2020 (Virtual Classroom Available) Aug 24, 2020 - Aug 26, 2020. Daniel P. Dennies, PhD, FASM
ASM Specialty Handbook: Aluminum and Aluminum Alloys J.R. Davis, editor . Created Date: 9/16/2014 4:59:42 PM